|
26. |
 |
How do I configure the Scanner on the PA96x?
Product : (PA500) (PA962) (PA963) (PA966) (PA967) (PA600 Standard) (PA982) (HT660) (PA96X) (RH767 HF) (RH767 UHF) |
|
|
|
|
 |
Please run the Scanner Utility in control panel |
|
|
|
|
|
|
|
27. |
|
Visual Studio .NET is designed to make deploying and debugging applications easy on Pocket PC
Product : (PA500) (PA962) (PA963) (PA966) (PA967) (PA600 Standard) (PA96X) (RH767 HF) (RH767 UHF) |
|
|
|
|
|
|
Visual Studio .NET is designed to make deploying and debugging applications easy on Pocket PC and other devices running Windows CE 4.1 and later. However, Visual Studio is unable to connect to devices running Windows CE that do not have an ActiveSync connection and cannot dynamically determine the CPU on non-Pocket PC devices. This add-on pack addresses these issues and enables Visual Studio to connect, deploy, and debug any device running Windows CE 4.1 or later. |
|
|
|
|
|
|
|
28. |
|
How to perform cold boot?
Product : (PA962) (PA963) (PA966) (PA967) (PA600 Standard) (PA982) (PA96X) (RH767 HF) (RH767 UHF) (MR650) |
|
|
|
|
|
|
There are 3 ways to perform cold boot:
1. Tap "Start" --> "My Computer" -> "Utilities" -> "BootMode" or execute "\Windows\Bootmode.exe", then press and hold "backspace" key and then tap on "Cold Boot" button.
2. Hard Reset – Push the small “Reset” hole at the back of terminal with long material and at the same time, press and hold "backspace" key.
3. Open the PCMCIA cover and push “cold boot” button with long material. |
|
|
|
|
|
|
|
29. |
|
Terminal does not power on
Product : (PA500) (PA962) (PA963) (PA966) (PA967) (PA600 Standard) (PA982) (PA96X) (RH767 HF) (RH767 UHF) |
|
|
|
|
|
|
1. Battery needs recharging or replacement.
2. Insure that battery is installed correctly |
|
|
|
|
|
|
|
30. |
|
By using MS336, how can I take picture
Product : (MS336) |
|
|
|
|
|
|
1. download and install image Configuration mamager from below link.
http://www.unitech-utp.com.tw/content/service/Download_3.aspx?sn=137
2. scan 'Disable HID emulation mode' in Quick Start Guide
3. Execute Image Configuration Manager, you will find 'MS336' option while start up.
4. to return back to HID mode, please scan 'Enable HID emulation Mode' in Quick Start Guide |
|
|
|
|
|
|